This is an old revision of the document!
BNC Adapter
- Allows the use of standard BNC-terminated test leads & probes on your Analog Discovery
- Selectable AC and DC coupling to oscilloscope probes
- Selectable 50-ohm or 0-ohm output impedance on arbitrary waveform generator (AWG) channels
- Differential scope inputs of the Analog Discovery become single-ended with the negative input connected to the ground.
The Discovery BNC adapter board is intended to be used with Digilent's Analog Discovery tool to enable the use of standard BNC terminated test leads and probes. The adapter board enables the user to AC couple or DC couple single-ended signals to the oscilloscope in the Analog Discovery 2.
Tutorials
Example Projects
Additional Resources
tag > instrumentation instrumentation-start adapter bnc-adapter analog-discovery
Analog Discovery BNC Adapter Board Resource Center
欢迎来到再保险source center for the BNC Adapter board!
Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the Analog Discovery BNC Adapter board, visit the product page on our main website:BNC Adapter
The Discovery BNC adapter board is intended to be used with the Analog Discovery™ tool to enable the use of standard BNC terminated test leads and probes. The adapter board enables the user to AC couple or DC couple signals to the oscilloscope in the Analog Discovery. Note that the BNC Adapter board grounds the negative inputs on the oscilloscope channels so that they are both single ended inputs.
Note: The Analog Discovery BNC adapter board does not have differential analog (scope) inputs
Revision History
We are currently on Revision B of the BNC Adapter board. You can find the revision of your board by looking on the top of the board underneath the name.
